If you’re facing issues with your MyQ opener or need to safeguard your personal information, follow our detailed instructions to reset your MyQ Garage Door Opener.
This article offers clear steps, supported by pictures, for a hassle-free reset process.
To reset your MyQ Garage Door Opener swiftly, follow these steps:
- Press and hold the settings button.
- Release the button once the light turns blue.
- Press and hold the settings button again.
- Release the button when the blue LED pauses.
In addition to the reset procedure, we’ll explore the reasons why one might consider resetting their MyQ garage door opener and the outcomes after completing the reset. Ensure a seamless reset with our expert guidance.
Instructions to Reset MyQ Garage Door Opener
Resetting your WiFi MyQ garage door opener is a quick and straightforward process involving four simple steps for a complete factory reset.
Before you proceed, ensure physical access to the MyQ base station, a small box that connects to your WiFi and is typically located in your garage. An active internet connection is essential to complete the process.
Take a moment to review the information below to understand which settings will be impacted during the reset.
Follow these step-by-step instructions for performing a WiFi MyQ Garage Door Opener factory reset:
Step 1: Press and Hold the Settings Button Locate the settings button on your MyQ Hub, identifiable by the gear icon. Press and hold it to initiate the reset process.
Step 2: Release Button When Light Blinks Blue Once the LED light starts blinking blue, release the settings button.
Step 3: Press and Hold Settings Button Again Confirm that the LED continues to blink blue and then press and hold the settings button once more. Note that the settings and reset button are the same for this tutorial.
Step 4: Release the Button when Blue LED Pauses Release the settings button when you observe the blinking blue LED pause, which may be accompanied by a beeping sound. This indicates that your MyQ Hub has been successfully factory reset.
The process to reset your MyQ garage opener is indeed that simple. Within minutes, you can complete the reset and restore your garage door to its original factory settings.
What resetting your MyQ Hub does to the device?
Erases WiFi Settings: Resetting the hub will erase your WiFi name, password, and network settings. Please note that you can perform this action using alternate steps only if WiFi connectivity is your primary concern.
Erases Door Sensors: All garage door sensors associated with the hub will be removed. These sensors, located on your garage door, communicate with the hub to indicate whether the door is open or closed.
Disconnects Hub from MyQ Account: Your personal information, including email address, phone number, and account user name, will be disconnected from the device.
This process also clears all existing settings and configurations, including scheduled tasks and automation, from the hub.
Clears Wireless Remotes and Keys: Any wireless remotes and door keys previously programmed to the smart garage controller will be removed from the hub during the reset.
Be aware of the implications mentioned above when proceeding with the reset, as it will result in a comprehensive reset of your MyQ Hub, affecting various functionalities and configurations.
MyQ LED Light Meanings
The MyQ Hub’s LED light serves as an informative indicator, providing essential updates on the device’s status. Featuring three distinct colors – blue, green, and yellow – the LED is prominently located on the front of the MyQ Smart Garage Hub, making it easily visible when facing the device directly.
Blue Lights:
Blinking Blue Light: The WiFi hub’s blinking blue light indicates it’s ready for setup and requires WiFi configuration.
Solid Blue Light: When the hub displays a solid blue light, it has entered WiFi setup mode, successfully connecting to your phone via a local WiFi network to complete setup.
Green Lights:
Blinking Green Light: A blinking green light on your hub signifies it’s transmitting information over your WiFi network.
Solid Green Light: A solid green light confirms that WiFi setup on your MyQ Hub is correct, and the hub has established a connection with the MyQ server.
Blue and Green:
Blinking Blue and Green: The MyQ Hub attempts to connect to your WiFi network using the password provided during setup. Continuous blinking of blue and green lights may indicate an incorrect WiFi password entry.
Yellow and Green:
A set of two yellow and green lights intermittently turning on and off suggests the hub is in programming mode. This occurs when connecting your MyQ smart garage hub to your garage door key or remote.
No LED Lights:
If none of the LED lights are illuminated, there might be a power issue at the outlet.
Verify proper power supply to the outlet by testing with another device, such as a lamp. If the outlet has power, consider replacing your MyQ Hub if the issue persists.