The Eero system utilizes mesh Wi-Fi routers to enhance home networks by connecting multiple access points. One router acts as the base station, linking to the modem for internet access, while others extend coverage.
Setting up the Eero system is straightforward, thanks to its user-friendly mobile app. These routers also provide robust Wi-Fi signals to support smart home devices. However, like any technology, Eero routers are not without their limitations.
Users may occasionally encounter technical issues that require troubleshooting. Resetting the router is often an effective solution to resolve such problems. This article explores various methods to reset an Eero router.
Methods to Reset Eero Wi-Fi
There are two primary ways to reset an Eero Wi-Fi router: a soft reset and a hard reset. It’s always advisable to attempt a soft reset first, as it preserves your network settings. If the issue persists, proceed with a hard reset. Below are detailed instructions for both methods.
Soft Reset
A soft reset retains all network configuration settings, ensuring that custom modifications remain intact. During this process, the device stays connected to the network. Follow these steps to perform a soft reset:
Step 1: Do not disconnect the Ethernet or power cables.
Step 2: Locate the reset button on your Eero device.
Step 3: Press and hold the reset button for approximately five seconds.
Step 4: Observe the LED light; it should start blinking yellow.
Step 5: Release the button once the yellow light appears.
Step 6: Wait for about ten minutes until the Eero router displays a solid white light, indicating the reset is complete. If the white light does not appear, consider performing a hard reset.
Hard Reset
A hard reset restores the Eero router to its factory default settings, erasing all custom configurations. This method is particularly useful if the router’s data table becomes corrupted. Follow these steps to execute a hard reset:
Step 1: Find the reset button on your Eero router.
Step 2: Press and hold the reset button for 15 seconds.
Step 3: Look for the LED light to blink red.
Step 4: Release the button once the red light starts blinking.
Step 5: Allow the process to complete, which may take up to five minutes.
Step 6: Check if the Eero router begins blinking a blue light.
Step 7: A blinking blue light confirms that the reset process is successful.
Factory Reset via the Eero App
Resetting your Eero router using the mobile app is another convenient option. Follow these steps to perform a factory reset:
Step 1: Open the Eero app and tap the Menu icon.
Step 2: Navigate to Network Settings.
Step 3: Scroll to the bottom of the screen and select Advanced Settings.
Step 4: Choose Delete Your Network from the options.
Step 5: Review the warnings displayed on the next screen, then confirm by selecting Delete Network.
Step 6: Finalize the action by selecting Delete Network again.
Step 7: The router will reset successfully. You can then set it up again using the app.
Conclusion
Basically, there are multiple methods to reset an Eero router, including soft resets, hard resets, and app-based resets. A soft reset is recommended as the first step, as it preserves your settings.
If the issue remains unresolved, a hard reset can restore the router to its default state. Both physical and app-based hard resets are viable options.
FAQs for How to Reset Eero
How do I manually reset Eero?
To manually reset your Eero router, follow the steps outlined in the article above for soft and hard resets.
How do I reset my registered Eero?
A registered Eero router can be reset using the Eero mobile app by following the app-based reset instructions.
How do I manually connect to Eero?
Use an Ethernet cable to connect the Eero router to your modem. Then, plug the Eero into a power source and ensure the modem is connected to an electrical outlet.
Why is my Eero not connecting to the internet?
Connectivity issues may arise due to temporary outages or outdated firmware. Ensure your firmware is updated and check for service disruptions.