The Hikvision cameras don’t use the standard Cat5/Cat5e/Cat6 color-coded wiring. Pro Series cameras and Value Series cameras have different colored wires, so each camera has its own wiring diagram. To connect a new connector (RJ45 jack) to the Hikvision IP camera refer to the diagrams below.
In some installing situations, the RJ45 plug gets damaged or even cut, in this case, you can save the camera by re-doing the RJ45 connector (jack). Below are listed the Hikvision wiring diagram from various Hikvision IP cameras.
Hikvision Pinout Diagram
The Hikvision IP Value Series consists of the models listed below. These models should have the pinout (wiring diagram) shown on the first picture.
Values Series models: | ||
DS-2CD2142FWD-ISB DS-2CD2132F-IWS DS-2CD2132F-I DS-2CD2112F-IWS DS-2CD2122FWD-ISB DS-2CD2112F-I DS-2CD2122FWD-IS DS-2CD2142FWD-IS DS-2CD2125FWD-I DS-2CD2135FWD-I DS-2CD2155FWD-I DS-2CD2185FWD-I DS-2CD2152F-IS DS-2CD2742FWD-IZS DS-2CD2732F-IS DS-2CD2732F-I DS-2CD2722FWD-IZSB DS-2CD2722FWD-IZSB DS-2CD2712F-I DS-2CD2752F-IZS DS-2CD2722FWD-IZS DS-2CD2412F-IW |
DS-2CD2412F-IW DS-2CD2742FWD-IZSB DS-2CD2542FWD-IWS DS-2CD2542FWD-ISB DS-2CD2532F-IS DS-2CD2522FWD-IWS DS-2CD2522FWD-ISB DS-2CD2520F DS-2CD2512F-I DS-2CD2552F-IS DS-2CD2542FWD-IS DS-2CD2522FWD-IS DS-2CD2E20F DS-2CD2E10F DS-2CD2035FWD-I DS-2CD2025FWD-I DS-2CD2T55FWD-I5 DS-2CD2335FWD-I DS-2CD2355FWD-I DS-2CD2385FWD-I DS-2CD2432F-IW |
DS-2CD2T35FWD-I5 DS-2CD2T25FWD-I5 DS-2CD2T42WD-I5 DS-2CD2042WD-I DS-2CD2032-I DS-2CD2232-I5 DS-2CD2T32-I5 DS-2CD2022WD-I DS-2CD2T22WD-I5 DS-2CD2012-I DS-2CD2T12-I5 DS-2CD2212-I5 DS-2CD2055FWD-I DS-2CD2T52-I5 DS-2CD2085FWD-I DS-2CD2T85FWD-I5 DS-2CD2342WD-I DS-2CD2332-I DS-2CD2322WD-I DS-2CD2352-I DS-2CD2325FWD-I |
The second picture shows the RJ45 pinout for Hikvision IP cameras of Pro Series line. The camera of this product line have these models: DS-2CD7XX, DS-2CD72XX, DS-2CD8XX, DS-2CD82XX.
Another diagram may come in handy and works for most of Hikvison cameras:
On the left side is the Hikvision camera’s pigtail, on the right side is the RJ45 connector. You have to match the colors as shown above. Once you terminate the connector, use an Ethernet coupler to bring the camera to the network. Or you can use a keystone jack (consult the article linked in the first paragraph).
Note: These diagrams are valid for Hikvision branded cameras or their OEMs which included the following brand names: 3xLogic, ABUS, Acegear, Activecam, ADJ, Advidia, Alarm.com, Alibi, Allnet, Alula, Anaveo, Annke, Arcdyn, Armix, Aukoo Technology, Aventura Technologies, Avue, Cantek, CCTVStar, ClearWay, Covert Security, Dax Networks, DMP, Dodwell BMS, DSS, Dunlop, DVR Unlimited, Ellipse Security, Epcom, Esypop, Ezviz, Gess Technologies, Global Network Security, GovComm, Grundig, GVS Security, Hinovision, Hitachi, Hitosino, Honeywell, Hunt CCTV, Hyundai Security, Infinite Pixels, Inkovideo, Innekt, Interlogix, Invidtech, JFL, Jlinks, LaView, LTS, Mercury Security, MicroView, Nelly’s Security, Norelco SafeCam, Northern Cameras, Novicam, NTT, Oculur, Onix. Power Technology, Protect Group, Raster, Remark Thermal, RVi, Safety Vision, Safire, Scati, SecurityTronix, Sentry CCTV, Sharp, Siqura, Smart CT Solutions, SnapAV / Luma, Space Technology, Syscom, Technomate, Toshiba, Trendnet, Vantage Security, Vezco CCTV, Videoteknika, Winic CCTV, Zicom.
Hi
Thanks a lot. You helped me to prove that two cams are still alive. They had stopped working because of water inside the pins, so I cut the female UTP socket and I used a surface mounted Cat5e wall socket to make the suggested wiring and both cams work well.
Now my problem is how to permamanently solve the problem by attaching a female UTP socket directly on the cable as the original one.
Any idea?
Thanks again
Manolis
In this colour code T568B whos color cable of data and whos cable of power
I can confirm the correctness of your pinout diagram but you are counting the pins in the wrong order. Following the EIA-568 standard, pin 1 is what you call pin 8.
If followed the EIA-568 standard the pins would be assigned to the following colours (so simply inversely):
1: orange
2: yellow
3: green
4: purple
5: grey
6: blue
7: brown
8: white
Thanks for the feedback.
I also can confirm the order listed by Gui did in fact work for my busted connection HIK Vision IR network camera.
Hi,
I have the DS-2CD2342WD-I and I power it via POE – water got into the connector and so i had to cut the cable above the power cable adapter (it it were to be powered by a local power source, not POE). This means i only have the single cable coming from the camera with what i think are the 2 wires that would have gone to the mains local power wrapped up together.
Is there a way for me to wire this up to a CAT5 connector or does it need the power source section attached too?
Yes, you can do that. You should see 10 wires there, disregard the black and white cables (since those are for the 12V DC pigtail). Use the 8 wires to redo the connector and power up the camera via the PoE. Please read this detailed article.