Wyze error codes explained

If your Wyze camera gives you an error code, most likely there’s an issue with connectivity. The list below tells what each error code means (for Wyze Cam V1/V2 and Pan). This can help you track down any issues and offer you a possible easy solution.

Wyze Error Code List

Wyze error code 90 → Device is offline (error code 90)
Solution: Check your internet connection or power cycle the camera. Consult this guide: Wyze error code 90 (solution).

Wyze error code 42 → Connection failed (error code 42)
Solution: Connect your mobile device to a different network or try again. Try different WiFi. Follow this guide: Wyze error code 42 (solution).

Wyze error code 20011 → Connection has timed out (error code 20011)
Solution: Please try again. Consult this guide.

Wyze error code 60 → Server not responding (error code 60). Cannot connect to the server
Solution: Make sure your internet is stable (the internet is not going on and off).

Wyze error code 41 → Network is unreachable (error code 41)
Solution: Please check network settings.

Wyze error code 10003.7 → Authentication failed (error code 10003.7)
Solution: Please try again.

Wyze error code 10003 → Authentication failed (error code 10003). Firmware operation failure.
Solution: Please try again.

Wyze error code 20002 → Connection failed (error code 20002). Max number of channels reached.
Solution: Please force close app and try again.

Wyze error code 27 (iOS only) → Connection has timed out (error code 27)
Solution: Please connect your mobile device to a different network or try again.

Wyze error code 0 (iOS only) → Connection failed (error code 0)
Solution: Please connect your mobile device to a different network or try again. Consult this guide.

Wyze error code 2 → Connection failed (error code 2)
Solution: Please check your network connection.

Wyze error code 20 → Connection failed (error code 20)
Solution: Check the way the camera is connected to the few. Consult this article.

All other error codes → Connection failed
Solution: Please try: 1. Force close app and retry 2. Power cycle the camera